Program Bus ID with MR55

Programming the Bus ID

JX200 / JX55 / OBD200 / ST55 with the MR-55 handheld

First, move the bus away from all fuel lane FRs and Gate FRs, into a parking lot for example.

Then put the MR-55 handheld in tech mode and set the bus number.

Step 1: Enter tech mode

From the Main Menu:

The handheld is now in tech mode, indicated by the asterisks around Main Menu:

** MAIN MENU **

Stay in tech mode for the rest of the procedure.

Step 2: Set the bus number

Press 1 to read the module.

The Read Results screen appears, for example:

BUS> 0000/005082
ODO>       331.1
EHRS>        0.0
IHRS         N/A

From the Read Results screen, press CLEAR

Select SET BUS# on the RF Parameters menu.

RF PARAMETERS
  1. SET BUS#
  2. INITIAL VALUES
  3. GPS SETTINGS

Enter the vehicle number. For bus 25082, type 2 5 0 8 2

Press SEND to program the module.

Step 3: Verify and exit

The screen shows the new setting under CURRENT SETTING. Confirm it matches the bus number.

ENTER BUS#
>
CURRENT SETTING
0000025082

•	Press CLEAR to return to the settings menu, or
•	Press RESET to return to the Main Menu.

Step 4: Read again and confirm

1.	Press CLEAR until you are back at the Main Menu.
2.	Press 1 to read the module again.
3.	Confirm the Read Results show the new bus number.

Set the bus number of the vehicle using the handheld